Vape guides
IGET ONE Size Australia
How tall is IGET ONE?
IGET ONE stands about 107.7mm from the base to the top of the mouthpiece. Across the face it is about 46mm, and the body is about 25.5mm deep. Those three numbers are the stick. They are not a puff count and they are not a flavour.
Set it beside a house key or a closed notebook if you want a sense of the height before it arrives. The black mouthpiece is part of that height. A photo that crops the mouthpiece off makes the body look shorter than the one that ships.

How heavy is it in the hand?
About 118.9 grams is the published weight. In the hand that is closer to a small phone than to a flat card. The weight is the sealed cell, the liquid and the body together. You do not add a cable, and you do not pour anything in later.
People who have only held a slim wrap are often surprised by the first lift. That surprise is the mass, not a fault. If the parcel feels far lighter than this, open the page photo again before you blame the courier. A different stick can share the letters IGET and still be another body.
The 119 grams includes the liquid you will actually draw. It does not get lighter in a useful way after a few days, and it does not get heavier because you chose Turbo. Turbo spends the run faster. It does not add metal. If a friend says their ONE feels like a different object, ask whether the screen is the curved one before you compare weights.
Why is there no cable on a stick this size?
The cell is 2700mAh and it is not rechargeable. There is no charging port on the base or the side. A taller body does not grow a socket. When the curved screen shows a low battery percent, the stick is finishing. A cable from another device has nowhere to go.
Regular is the longer run, about 12000 puffs. Turbo is the shorter, harder run, about 9000. The button changes that run. It does not charge the cell, and it does not change the 119 gram weight. Wipe the mouthpiece if a pull is only tight, then read the screen once from this vape catalogue.

When is the wrap the other choice?
IGET BAR PRO is the no-screen wrap. It fires when you draw, it has no mode button, and it has no charging port. Choose it when you want that flatter body. Stay with ONE when you want the curved screen and the two modes. The fruit name can match. The body will not.
Do not guess BAR PRO’s size from ONE’s millimetres. This page only publishes the ONE measurements. Open the wrap’s own photo if the height is the thing you are deciding.

What should you check before you pay?
The cart line should name IGET ONE, the flavour button, and one stick. About 108mm, about 119 grams, a curved screen, Regular or Turbo, and no charging port. If the line names BAR PRO, you followed a fruit onto the wrap.
Adults 18+ only. A pocket that already holds a phone will usually hold this height. A pocket that only wants a flat wrap is a reason to open BAR PRO on purpose, not a reason to call ONE the wrong weight.
Write the three measurements down if you are buying for someone else: about 108mm tall, about 46mm wide, about 119 grams. A message that says “the tall IGET” can still mean this stick or a story someone heard about a different body. The product page photo, with the curved screen, is the check that beats the nickname.
Depth is the number people skip. About 25.5mm from front to back is why it sits thicker than a card in a shirt pocket. Width and height get the attention. The depth is what you notice once it is actually in the pocket.
